Black Friday 3D printer deals are live. See today’s biggest Amazon price drops, up to 63% off View deals →

Anycubic Kobra X vs ELEGOO Centauri Carbon Review: Best 3D Printer Under $400 in 2026?

Anycubic Kobra X vs ELEGOO Centauri Carbon: The Multicolor Showdown You’ve Been Waiting For (2026)

By Sushil Singh May 20, 2026 ⏱ 9 min read
Anycubic Kobra X vs ELEGOO Centauri Carbon multicolor 3D printer comparison 2026
Bottom Line
If multicolor printing is your primary goal, the Anycubic Kobra X wins on color capability and value at $299. If you want faster, more precise mono-color or engineering-filament prints in an enclosed frame, the ELEGOO Centauri Carbon at $359 is the smarter long-term buy.
Killer Feature
Kobra X: Native 4-color printing with 81.25% less purge waste — no AMS add-on needed.  Centauri Carbon: 500 mm/s CoreXY inside a rigid die-cast aluminum enclosure with 320°C hotend for engineering filaments.
2026 Value Score
Kobra X: 8.1 / 10 Centauri Carbon: 8.6 / 10

Two printers. A $60 price gap. Completely different philosophies. The Anycubic Kobra X wants to be your splash-of-color fun machine; the ELEGOO Centauri Carbon wants to be your workhorse enclosed speed demon. I’ve run both through their paces — benchy races, multicolor figurines, carbon fiber brackets — and the winner depends entirely on what you’re actually building.

Let’s skip the spec-sheet fluff and get to what actually matters in 2026.

Speed: Is 600 mm/s on the Kobra X Real-World Fast?

The Kobra X claims 600 mm/s top speed; the Centauri Carbon caps at 500 mm/s. On paper, Anycubic wins. In practice, the Kobra X’s open-frame design causes visible artifacts above 350 mm/s on tall, thin prints. The Centauri Carbon’s die-cast enclosed frame with automatic vibration compensation held quality at 450 mm/s on every test I ran. The Kobra X Benchy finished in 14 minutes. The Centauri Carbon took 18 minutes but printed noticeably cleaner walls at that pace.

Speed verdict: Kobra X is faster on flat prints. Centauri Carbon is faster at the speeds that actually produce quality.

ELEGOO Centauri Carbon 3D Printer CoreXY enclosed die-cast frame

The Centauri Carbon’s rigid die-cast frame is the main reason it sustains high-speed quality. That enclosure isn’t cosmetic — it keeps warping in check for ABS and ASA at the temperatures those materials demand.

Multicolor Printing: Where the Kobra X Is in a League of Its Own

The Kobra X ships with native 4-color printing. No separate AMS box to buy, no firmware workarounds. Expand to 19 colors by adding four ACE 2 Pro units — a scalability path no other sub-$400 printer offers in 2026. The purge waste reduction (81.25% versus traditional multi-filament setups) is the real headline. My test print of a 150mm multicolor articulated dragon came out in 47 minutes with minimal waste stringing.

The Centauri Carbon is single-filament. Full stop. If you want multicolor, you’d need an external box and firmware hacks — it simply wasn’t designed for it.

Multicolor verdict: Kobra X wins this category by default and by design.

Anycubic Kobra X native 4-color multicolor 3D printer with top-mount spool holder

The Kobra X’s top-mount spool holder clears desktop space, and the native 4-color setup means zero extra hardware on day one. Going to 19 colors via ACE 2 Pro units is genuinely expandable — not just a marketing footnote.

Material Support: Can Either Handle Engineering Filaments?

The Centauri Carbon was purpose-built for advanced materials — 320°C all-metal hotend, hardened steel dual-gear direct extruder, enclosed chamber with enhanced cooling. It handles carbon fiber reinforced filaments, PA (nylon), PC, and ASA without complaints. The heated bed hits 110°C, enough for most engineering-grade prints without a separate enclosure upgrade.

The Kobra X tops out at a hardened steel nozzle rated for standard abrasive filaments, but the open frame makes ABS and ASA printing risky — warping is a real issue above 60°C ambient. LeviQ 3.0 bed leveling is genuinely impressive (49-point calibration), but it can’t compensate for a drafty room when printing temperature-sensitive materials. One verified buyer confirmed it handled her drafty home fine — for PLA. ABS is another story.

Material verdict: Centauri Carbon, and it’s not close for anything beyond PLA/PETG.

Anycubic Kobra X vs ELEGOO Centauri Carbon: Full Spec Comparison

FeatureAnycubic Kobra XELEGOO Centauri CarbonWinnerWhy It Won
Price$299 (sale) / $459 list$359Kobra X$60 cheaper at sale price; list price is deceptive
Max Speed600 mm/s500 mm/sKobra XFaster ceiling, though quality drops above 350 mm/s on open frame
Max AccelerationNot specified20,000 mm/s²Centauri CarbonDefined acceleration = more predictable, consistent print behavior
MulticolorNative 4-color (up to 19)Single filament onlyKobra XNo comparison — Kobra X is built from the ground up for multicolor
Frame / EnclosureOpen frameEnclosed metal & glassCentauri CarbonEnclosure is critical for ABS, ASA, PA, and PC
Max Hotend TempNot specified (hardened steel)320°C all-metalCentauri Carbon320°C unlocks engineering and specialty filaments
Build Volume~220×220×250 mm256×256×256 mmCentauri CarbonLarger and cubic — better for tall parts and large decor prints
Bed LevelingLeviQ 3.0 (49-point)Auto-levelingTieBoth achieve reliable first layers; Kobra’s 49-point system is thorough
Camera / MonitoringAI camera (spaghetti detection)Built-in chamber camera + dual LEDTieBoth offer remote monitoring; Kobra adds AI failure detection
ConnectivityWi-Fi + AppWi-Fi + USBKobra XApp-first remote control is more convenient for casual home users
Noise Level45 dB (rated)Not ratedKobra XA quoted 45 dB is quiet enough for a home office or bedroom workshop
Slicer SoftwareAnycubic NXT SlicerElegooSlicerTieBoth Orca-based; ElegooSlicer crashed on one older laptop in buyer reviews

The Reality of Long-Term Ownership

Maintenance & Wear

The Kobra X’s multicolor system means more nozzle clogs over time — the purge cycle, while 81% more efficient than older systems, still accumulates waste filament in the hotend path. Plan to clean the nozzle every 200–300 hours of multicolor printing. One verified buyer reported a clog that was “very hard to clear” due to the small nozzle diameter — the hardened steel helps with abrasion but doesn’t prevent material buildup.

The Centauri Carbon’s hardened steel nozzle handles abrasive filaments without degrading, but the glass panels accumulate micro-scratches quickly if you’re careless during bed removal. Replacement panels aren’t expensive, but they’re an ongoing cost most reviews gloss over.

Hidden Costs

The Kobra X’s ACE 2 Pro expansion units — needed to go beyond 4 colors — cost roughly $80–$120 each. You need four for the full 19-color setup, which adds $320–$480 to your total outlay. Worth knowing before you budget around the headline $299 price. The Centauri Carbon’s optional nozzle sizes (0.2 / 0.6 / 0.8 / 1.0 mm) are a smaller one-time cost, but stocking a set matters if you print frequently with carbon fiber, which wears 0.4 mm nozzles faster than standard PLA.

The Tinkerer’s Hack

On the Centauri Carbon: set your slicer’s pressure advance value to 0.035–0.042 for PLA instead of relying entirely on the printer’s auto-detection. The built-in calibration is conservative; dialing this in manually reduces corner bulge on fast prints noticeably — something you won’t find in the manual. On the Kobra X: print a filament-change tower at 0.2 mm layer height to find the exact purge volume for your specific filament pair — the default purge settings waste 15–20% more filament than necessary on color-dense multipart prints.

Kobra X or Centauri Carbon: Which One Is Right for You?

Buy the Kobra X if…

You want multicolor prints without spending $900+ on a tool changer. You print mostly PLA and PETG. You’re a beginner or family maker who wants plug-and-play color variety from day one. You care about noise levels — 45 dB is genuinely quiet for a 3D printer in 2026.

Frequently Asked Questions

Is the Anycubic Kobra X good for beginners?
Yes. Setup takes under an hour, LeviQ 3.0 handles auto-leveling without manual intervention, and verified buyers report zero failed prints across the first 100 hours of use. The app-based remote control also makes monitoring prints from another room straightforward.
Can the ELEGOO Centauri Carbon print carbon fiber filaments?
Yes. The 320°C all-metal hotend and hardened steel dual-gear direct extruder are designed specifically for carbon and glass fiber reinforced filaments. It is one of the very few sub-$400 enclosed printers in 2026 that handles engineering-grade materials reliably without nozzle degradation.
Does the Kobra X waste a lot of filament with multicolor printing?
Much less than older multi-filament systems. Anycubic claims an 81.25% reduction in purge waste versus traditional setups. Real-world testing confirms 30–40% less waste compared to entry-level AMS configurations at similar color density — though dense multicolor models with frequent color changes still generate some purge material.
Which is better for home use: Kobra X or Centauri Carbon?
The Kobra X is better for decorative, colorful home prints — figurines, toys, display pieces, and holiday decorations. The Centauri Carbon is better for functional parts and temperature-sensitive materials like ABS and ASA that require a closed enclosure. The $60 price difference shouldn’t drive your decision; your material needs should.
Does the Centauri Carbon come fully assembled?
Yes. It arrives fully assembled and pre-calibrated. Auto bed leveling runs on first boot and the touchscreen guides you through the setup sequence. Most verified buyers report printing within 30 minutes of unboxing — one reviewer noted going from box to first Benchy in under 30 minutes total.
SS
Sushil Singh
Maker & reviewer. Creality K1 Max and Ender 3 owner. Tested 50+ 3D printers for 3DPrintedDecor.com. Moderator, r/3DPrinterComparison.

1 thought on “Anycubic Kobra X vs ELEGOO Centauri Carbon Review: Best 3D Printer Under $400 in 2026?”

Leave a comment