
The Flashforge Adventurer 5M and 5M Pro are fast, easy printers, but every owner eventually needs a spare nozzle, a fresh build plate, or a part after something wears out. This guide covers the accessories worth buying, which upgrades fit which model, and which replacement part fixes which problem. Every product here was available on Amazon when we checked in November 2026.
Start here: the 5 accessories most owners need
- A spare 0.4 mm nozzle: a clog then costs you a few minutes instead of a week waiting for parts. See nozzles
- A double-sided PEI plate: better first layers, plus a spare for back-to-back prints. See plates
- The enclosure kit: if you’ll print ABS or ASA, or want a quieter printer. See enclosure
- The camera kit: watch long prints from your phone. See camera
- A 0.6 mm hardened nozzle: only if you’ll print carbon-fiber or other abrasive filaments. See nozzles
How we built this guide: we compared Flashforge’s product specifications, Amazon ratings and stock, and the compatibility listed by each seller. We haven’t tested these accessories ourselves. Prices refresh automatically. As an Amazon Associate we earn from qualifying purchases, and that doesn’t change what we recommend.
Build plates: the first upgrade most owners buy
The stock plate wears out with use, and a second plate lets you start the next print while the last one cools.
Best overallFLASHFORGE Double-Sided PEI Plate
Flashforge’s own upgrade plate, with a textured PEI side and a smooth side. It’s one of the best-selling AD5M accessories (700+ bought in the past month when we checked), with a 4.7-star rating.
Buy it if: your first layers are starting to lift, or you want a spare plate for back-to-back prints.
Fits: Adventurer 5M, 5M Pro, AD5X
$16.50In stockCheck price on Amazon
Budget pickTIOPY Double-Sided Textured PEI Plate
A third-party 235 × 235 mm textured PEI plate for about a third of the price of Flashforge’s, with 755 ratings at 4.6 stars.
Buy it if: you just want a cheap spare and don’t mind a non-Flashforge part.
Fits: Adventurer 5M (235 × 235 mm)
$8.49In stockCheck price on Amazon
For ABS/ASAFLASHFORGE High-Temperature PC Plate
A magnetic, flexible smooth PC sheet that Flashforge makes specifically for printing ABS and ASA.
Buy it if: you’re moving beyond PLA and PETG into ABS or ASA (pair it with the enclosure below).
Fits: Adventurer 5M / 5M Pro, AD5X
$16.50In stockCheck price on AmazonNozzles: spares, speed and abrasive filaments
The AD5M’s nozzles swap without tools in about 3 seconds, according to Flashforge, so keeping spares on hand is cheap insurance against a clog in the middle of a project.
Must-have spareFLASHFORGE 0.4 mm Nozzle Assembly
The official stock-size replacement nozzle assembly, with Flashforge’s 3-second quick-detach design, so a clog costs you a quick swap instead of a teardown. It has a 4.2-star rating from 342 reviews.
Buy it if: you print often and don’t want a clog to stop you for days while a part ships.
Fits: Adventurer 5M series
$35.00Check price on Amazon
For carbon fiberFLASHFORGE 0.6 mm Hardened Nozzle
A hardened 0.6 mm nozzle for abrasive, high-strength filaments like carbon-fiber or glass-filled blends, which wear out standard brass nozzles quickly. The bigger opening also prints large functional parts faster.
Buy it if: you plan to print PLA-CF, PETG-CF or other filled filaments.
Fits: Adventurer 5M series
$27.30In stockCheck price on Amazon
Every sizeFLASHFORGE 4-Nozzle Set (0.25 / 0.4 / 0.6 / 0.8 mm)
All four official sizes: 0.25 mm for fine detail and miniatures, 0.4 mm for everyday prints, and 0.6 or 0.8 mm for fast, strong parts.
Buy it if: you want to experiment with detail and speed. Otherwise buy single nozzles as you need them.
Fits: Adventurer 5M series
$90.30In stockCheck price on AmazonEnclosure and protection
For ABS/ASAFLASHFORGE Enclosure Kit
Flashforge’s DIY enclosure for the open-frame 5M. Flashforge says it cuts noise from about 65 dB to 55 dB, keeps a steadier temperature for ASA and PC, and keeps kids and pets away from hot parts.
Buy it if: you print ABS/ASA, your room is drafty, or the printer shares space with kids or pets.
Fits: Adventurer 5M
$29.99In stockCheck price on Amazon
Keep it clean3D Printer Dust Cover
A fabric cover that keeps dust off the rods and build plate between prints. It costs less than an enclosure.
Buy it if: your printer sits idle for days at a time in a dusty room or garage.
Fits: Adventurer 5M
$15.17In stockCheck price on AmazonMonitoring and lighting
Watch remotelyFLASHFORGE Camera Kit
Lets you watch and control prints through the Flash Maker app, so you can catch a failed print early instead of finding a nest of spaghetti hours later. It has 657 ratings, and 700+ were bought in the past month.
Buy it if: you run long prints while you’re at work or asleep.
Fits: Adventurer 5M, 5M Pro, AD5X
$29.99In stockCheck price on Amazon
See the first layerFLASHFORGE LED Light Strip
An official LED strip that lights the build area, which helps both when you check the first layer and when you use the camera at night.
Buy it if: your printer sits in a dim corner, or you added the camera.
Fits: Adventurer 5M, 5M Pro, AD5X
$13.50In stockCheck price on AmazonReplacement parts: what to buy when something breaks
Match the symptom to the part using the table below, then use the cards to order. All of these are official Flashforge parts except the Xirbbo gear kit.
| Symptom | Try first (free) | Part to buy |
|---|---|---|
| Nothing comes out, or the extrusion is thin and patchy | Cold pull or nozzle cleaning, then check filament path | 0.4 mm nozzle, then the extruder kit |
| Clicking extruder, chewed or ground filament | Lower print speed or temperature, then clean the gears | Feeding assembly or drive feeder |
| Print keeps going after the spool runs out | Check the sensor cable and that filament passes through the sensor | Runout sensor |
| Droopy overhangs, stringy bridges, noisy fan | Check fan speed in your slicer, clean dust from the fan | 5015 turbo fan |
| First layer won’t stick or prints pop off | Wash the plate with dish soap, re-level, slow the first layer | PEI plate |
| Heating error or temperature won’t hold | Reseat the nozzle and its connector | Extruder kit (or contact Flashforge support) |
| Touch screen or mainboard failure | Contact Flashforge support. These parts had no Amazon seller in November 2026 | — |
Biggest fixFLASHFORGE Assembled Extruder Kit
The complete extruder assembly with a 0.4 mm high-flow nozzle. Replacing the whole unit is the fastest fix after a bad clog, a damaged heater or a broken thermistor.
Buy it if: simpler fixes (new nozzle, cleaning the gears) haven’t solved under-extrusion or heating errors.
Fits: Adventurer 5M series
$76.00In stockCheck price on Amazon
Feeding problemsFLASHFORGE Filament Feeding Assembly
The official feeder assembly, rated 4.8 stars, with 300+ bought in the past month. It’s the usual fix when filament grinds, skips or won’t load.
Buy it if: you hear clicking from the extruder or see ground-down filament.
Fits: Adventurer 5M series
$15.99Low stockCheck price on Amazon
Better gripFLASHFORGE Dual-Gear Drive Feeder
Flashforge’s dual-gear drive feeder kit grips the filament from both sides for steadier feeding.
Buy it if: your current gears are worn.
Fits: Adventurer 5M / 5M Pro
$14.99In stockCheck price on Amazon
Budget gearsXirbbo Nano-Coated Extruder Gear Kit
A cheaper third-party gear set with a nano coating, rated 4.6 stars. It’s a low-cost way to refresh worn gears.
Buy it if: you’re comfortable swapping small parts and want to save money.
Fits: Adventurer 5M / 5M Pro
$15.99
Pause on runoutFLASHFORGE Filament Runout Sensor
The official runout sensor pauses a print when the spool runs out, instead of finishing it with no filament.
Buy it if: the printer no longer pauses when filament runs out.
Fits: Adventurer 5M / 5M Pro
$9.75In stockCheck price on Amazon
Cooling fixFLASHFORGE 5015 Turbo Fan
The official replacement part-cooling fan. Weak cooling shows up as droopy overhangs and stringy bridges.
Buy it if: the fan is noisy, slow or dead, or overhangs suddenly got worse.
Fits: Adventurer 5M series
$11.25In stockCheck price on AmazonTools, filament and storage
Toolbox68-Piece 3D Printer Tool Kit
A 68-piece kit with deburring tools and other printing essentials in one storage case, with 649 ratings at 4.8 stars.
Buy it if: you’re still using a kitchen knife to pop prints off the plate.
Fits: Any printer
$29.59In stockCheck price on Amazon
Dry filamentCreality Space Pi Filament Dryer
Wet filament causes stringing, popping and weak parts. A dryer fixes it, especially for PETG and TPU.
Buy it if: you live somewhere humid or print PETG, TPU or nylon.
Fits: Any 1.75 mm filament
$56.00
Fast PLAFLASHFORGE Rapid PLA
Flashforge’s high-speed PLA, made to keep up with the AD5M’s fast printing.
Buy it if: you want a filament made for the printer’s high speeds.
Fits: Any 1.75 mm printer
$17.27In stockCheck price on AmazonDon’t own an Adventurer 5M yet?
Both models get the same accessories listed above. The standard 5M is the budget pick, and the 5M Pro is the higher-end model. Compare them in our Adventurer 5M review and 5M vs AD5X comparison.
Simple maintenance that saves you money
- Clean the build plate with warm water and dish soap when first layers start lifting. Fingerprint oil is the most common cause.
- Keep filament dry. Store opened spools in a sealed box with desiccant, and dry them before printing PETG or TPU.
- Check the extruder gears for filament dust every few spools, and brush them clean.
- Update the firmware through the printer menu or Flashforge’s software.
Our full 3D printer maintenance guide covers more, and fixing first-layer adhesion goes deeper on bed problems.
Frequently asked questions
What is the best first upgrade for the Flashforge Adventurer 5M?
Start with a spare 0.4 mm nozzle and a second build plate. Together they cover the two most common problems, clogs and first-layer adhesion, for under $60. If you plan to print ABS or ASA, add the enclosure kit.
Do Adventurer 5M accessories fit the 5M Pro?
Most do. The nozzles, extruder parts, camera kit, LED strip and Flashforge’s double-sided PEI plate are listed for both the 5M and 5M Pro, and several also fit the AD5X. The enclosure kit and dust cover are made for the open-frame 5M. Each card above lists what the product fits.
Can the Adventurer 5M print carbon fiber filament?
Yes, but not with the standard brass nozzle, which abrasive filaments wear out quickly. Fit the 0.6 mm hardened nozzle for PLA-CF or PETG-CF.
Where can I buy an Adventurer 5M touch screen or mainboard?
When we checked in November 2026, Amazon had no seller for the official touch screen or mainboard. Contact Flashforge support or the official Flashforge store for those parts.
How often should I replace the nozzle on the Adventurer 5M?
There’s no fixed schedule. Replace it when cleaning no longer fixes under-extrusion, or right away if you’ve been printing abrasive filament with a brass nozzle. Keeping a spare means a clog costs you minutes, not days.
Related guides
Compatibility comes from each seller’s Amazon listing, so confirm your model on the product page before buying. Prices and availability change often. As an Amazon Associate, 3DPrintedDecor.com earns from qualifying purchases.
Free 3D printing temperature cheat sheet
Nozzle and bed temperatures for common filaments, in one page.
Keep reading
3D Printed Home DecorCreality K1C 3D Printer Review: Is This the Best 3D Printer Under $600 in 2025?Jul 21, 2025
3D Printed Home DecorComplete 3D Printing Starter Kit Under $400 Total: Everything You Need This Black FridayNov 17, 2025
3D Printed Home DecorBambu Lab A1 vs A1 Mini: Complete 2025 ComparisonDec 5, 2025
3D Printed Home DecorJafanda JF888 vs JF999 vs JF1500 Air Purifier Review 2026 (Which Should You Buy?)Mar 18, 2026
3D Printed Home DecorBambu Lab A1 Review 2026: Are You Actually Happy About This?Apr 4, 20263D Printed Home DecorBest 3D Printer for a 14-Year-Old: A Parent’s 2026 GuideSep 14, 2026