
Black Friday 2026 is Friday, November 27, and Cyber Monday is November 30. Amazon hasn’t announced its sale dates yet. In recent years its Black Friday sale has started about a week before Thanksgiving, so we expect deals to begin around November 19.
The prices below were checked on October 11-12, 2026, and we’ll update them when Amazon’s sale starts. Printing a lot of filament? Pair this guide with our Black Friday 3D printer deals guide and our price tracker of 18 printers. Last updated: October 12, 2026.
Filament is the one thing every 3D printer owner buys again and again, so it’s worth buying well. This guide pairs current Amazon filament prices with the advice you need to choose the right material: PLA, PLA+, PETG, TPU, silk, matte and specialty filaments, plus drying and storage.
Every price is converted to a price per kilogram, so a 250g sampler and a 10kg bundle can be compared fairly. We aren’t calling anything a record low yet. Use the October prices as your baseline and compare them against Amazon’s Black Friday sale.
Black Friday Filament Deals 2026 at a Glance
- Kingroon PETG, 10 Rolls (10KG, Gray): $99.99 – $10.00/kg, PETG.
- SUNLU PETG, 4KG (2 Black + 2 Black): $39.99 – $10.00/kg, PETG.
- ELEGOO Matte PLA Bundle, 4KG (4 Colors): $43.99 – $11.00/kg, Matte PLA.
- Creality PLA Black & White, 2KG: $23.99 – $12.00/kg, PLA.
- Overture High Speed PLA, 2KG Bundle: $26.99 – $13.50/kg, PLA.
- eSUN PETG, 1KG Solid Black: $13.99 – $13.99/kg, PETG.
- SUNLU PLA Black, 1KG: $13.99 – $13.99/kg, PLA.
- SUNLU PLA+ Bundle, 10KG (10 Colors): $139.99 – $14.00/kg, PLA+.
- eSUN TPU 95A, 1KG Grey: $23.99 – $23.99/kg, TPU.
- Creality Space Pi Filament Dryer Plus (2 Spools): $89.00 – two-spool dryer.
Which Filament Should You Buy?
Pick the material by what you’re printing, then pick the brand by price per kg.
| Filament | Best For | Difficulty | Typical Nozzle Temp* | Watch Out For |
|---|---|---|---|---|
| PLA / PLA+ | Decor, prototypes, everyday prints, beginners | Easy | 190-220°C | Softens in a hot car or near a heater |
| PETG | Functional parts, outdoor use, tougher parts | Medium | 230-250°C | Stringing, and it absorbs moisture faster than PLA |
| TPU 95A | Flexible parts, phone cases, gaskets | Harder | 210-230°C | Print slowly; direct-drive extruders work best |
| Silk PLA | Shiny decor, vases, cosplay props | Easy to medium | 200-230°C | Works best at lower print speeds |
| Matte PLA | Display pieces and minis; hides layer lines | Easy | 190-220°C | Slightly rougher surface feel |
| PLA-CF (carbon fiber) | Stiff parts and jigs | Medium | 210-240°C | Abrasive: use a hardened steel nozzle |
| Glow-in-the-dark PLA | Night lights and novelty prints | Easy to medium | 190-220°C | Abrasive: use a hardened steel nozzle |
| Wood-fill PLA | Wood-look decor you can sand and stain | Medium | 190-220°C | Check the spool for nozzle size advice |
*Typical ranges only. Always follow the temperature printed on your spool.
PLA and PLA+ Filament Deals
Spools and small bundles from 1kg to 4kg, cheapest per kg first among the 4kg packs.

SUNLU PLA Black, 1KG
A plain black 1kg PLA spool and one of the cheapest single spools in this guide. It sold for $11.19 on Prime Big Deal Days (October 7), so $13.99 is a good baseline for the sale.
Check price on Amazon → See price history on Keepa
eSUN PLA+ 1KG, Black
PLA+ for slightly tougher prints than standard PLA, on a 1kg spool. A common upgrade pick when standard PLA feels brittle.
Check price on Amazon → See price history on Keepa
Creality PLA+ Rainbow, 1KG
A rainbow-gradient PLA+ spool for colorful decor and gifts, sold as a single 1kg spool.
Check price on Amazon → See price history on Keepa
Creality PLA Black & White, 2KG
Two 1kg spools, one black and one white, the two colors most people go through fastest.
Check price on Amazon → See price history on Keepa
Overture High Speed PLA, 2KG Bundle
A 2kg bundle of Overture High Speed PLA in 1.75mm. A good all-purpose pick for everyday prints. Our old guide listed this ASIN as a 1kg spool; Amazon’s listing shows it is the 2kg bundle.
Check price on Amazon → See price history on Keepa
ELEGOO Matte PLA Bundle, 4KG (4 Colors)
Four 1kg spools in four colors with a matte finish that hides layer lines. One of the lowest prices per kg among the PLA bundles.
Check price on Amazon → See price history on Keepa
SUNLU PLA+ 16-Color Bundle (4KG)
Sixteen 250g spools, individually vacuum packed. It’s the best way to try many colors, but it costs more per kg than 1kg spools.
Check price on Amazon → See price history on Keepa
Dynta 10 Colors PLA, 250g Spools (2.5KG)
Ten 250g PLA spools aimed at beginners who want to test colors before committing to full spools.
Check price on Amazon → See price history on KeepaBulk PLA Bundles (10KG)
Ten spools at once. These cost more upfront but are usually the best way to cover a full colour range.

SUNLU PLA+ Bundle, 10KG (10 Colors)
Ten 1kg spools of PLA+ in ten colors, with enhanced strength and layer adhesion. Each spool is individually sealed.
Check price on Amazon → See price history on Keepa
SUNLU PLA Matte Bundle, 10KG (10 Colors)
A matte finish that hides layer lines, good for miniatures, figurines and display pieces.
Check price on Amazon → See price history on Keepa
ANYCUBIC Multicolor PLA Bundle, 10KG
A 10kg multicolor PLA bundle. It sold for $98.37 on Prime Big Deal Days (October 7) and is back at $139.99, so watch for the price to drop again.
Check price on Amazon → See price history on KeepaPETG Filament Deals
PETG is the step up from PLA for functional parts. See our PLA vs ABS vs PETG guide and our list of affordable bulk PETG.

Overture High Speed PETG, 1KG Black
A black 1kg PETG spool for functional parts that need more toughness and heat resistance than PLA.
Check price on Amazon → See price history on Keepa
eSUN PETG, 1KG Solid Black
Reliable PETG with good layer adhesion, on a 1kg spool. Amazon showed low stock when we checked.
Check price on Amazon → See price history on Keepa
IEMAI PETG, Transparent Smoke Gray, 1KG
A translucent smoke-gray PETG for lamp shades, covers and see-through parts.
Check price on Amazon → See price history on Keepa
IEMAI PETG, Translucent Blue-Purple Gradient, 1KG
A translucent blue-to-purple gradient PETG for decor, lamps and display pieces.
Check price on Amazon → See price history on Keepa
SUNLU PETG, 4KG (2 Black + 2 Black)
Four 1kg spools of black PETG, a good stock-up option if you print functional parts regularly.
Check price on Amazon → See price history on Keepa
Kingroon PETG, 10 Rolls (10KG, Gray)
Ten 1kg rolls of gray PETG, the lowest price per kg in this guide. Amazon showed low stock when we checked.
Check price on Amazon → See price history on Keepa
SUNLU PETG Bundle, 10KG (10 Colors)
Ten individually vacuum-sealed 1kg PETG spools in ten colors, with good durability, chemical resistance and layer adhesion.
Check price on Amazon → See price history on KeepaSpecialty Filament: Silk, TPU, Wood, Carbon Fiber and Glow
Specialty materials are priced per spool rather than in bundles. See also our guides to silk PLA, TPU and glow-in-the-dark filament.

Overture Silk PLA, 1KG Silk Blue
A metallic-sheen silk PLA for vases, jewelry and decorative prints.
Check price on Amazon → See price history on Keepa
LOVOON Tricolor Silk PLA, Green-Red-Blue, 1KG
One spool that blends three silk colors along its length, so a single print shows a color shift without a multicolor printer.
Check price on Amazon → See price history on Keepa
eSUN TPU 95A, 1KG Grey
A flexible 95A TPU for phone cases, gaskets and wearables.
Check price on Amazon → See price history on Keepa
ELEGOO Wood PLA, 1KG
A wood-look PLA that can be sanded and stained after printing.
Check price on Amazon → See price history on Keepa
ELEGOO PLA-CF, 1KG Black
Carbon-fiber-filled PLA for stiffer parts. It’s abrasive, so use a hardened nozzle.
Check price on Amazon → See price history on Keepa
Duramic Glow-in-the-Dark PLA, 1KG Glow Blue
Glow-in-the-dark PLA for night lights and novelty prints. It’s abrasive, so use a hardened nozzle.
Check price on Amazon → See price history on KeepaERYONE Silk PLA
- ERYONE silk PLA 1kg spools ran from about $13.99 to $19.99 depending on the color or multicolor pack when we checked. Browse ERYONE silk PLA colors on Amazon →
Filament Storage and Drying
Dry filament prints better. A dryer or an airtight box is the cheapest way to avoid failed prints. See our best filament dryers.

Creality Space Pi Filament Dryer Plus (2 Spools)
A two-spool dryer with adjustable temperature from 45℃ to 70℃, 360° hot air, a humidity monitor and 12 filament presets.
Check price on Amazon → See price history on Keepa
YOOPAI Pro Filament Storage Box with Humidity Monitor
An airtight storage box with a temperature and humidity monitor and desiccant, made for 1KG spools.
Check price on Amazon → See price history on KeepaMore Storage and Upkeep Essentials
- YOOPAI Filament Storage Box, 6-pack ($33.99): Six airtight 4.0L boxes with desiccants and labels. Check price →
- VOISEN color-indicating silica gel, 24 packs of 100g ($23.99): The packs change color when they’re full, which tells you when to dry or replace them. Check price →
- Creality MK8 brass nozzle kit, 24 pieces ($10.99): Spare brass nozzles in 0.2 to 1.0mm for Ender 3 and CR-10 printers. These are brass, so they wear quickly on carbon-fiber or glow filaments; use a hardened steel nozzle for those. Check price →
Price Per Kilogram: Every Filament Compared
The sticker price hides the real cost. This table sorts every filament above by price per kg, based on Amazon listings checked on October 11-12, 2026.
Price per kg is the listed price divided by the total weight in the title. It doesn’t include coupons or shipping. Savings and ‘was’ prices are shown only where Amazon displays them.
Prices That Moved Since Prime Big Deal Days
- The ANYCUBIC Multicolor PLA 10KG bundle sold for $98.37 on October 7 and is back at $139.99.
- The SUNLU PLA Black 1KG spool sold for $11.19 on October 7 and is $13.99 now.
- Both are good tests for Black Friday: if the sale price doesn’t beat the October 7 price, it isn’t a bargain.
How to Choose Filament
1. Check the diameter
Most printers use 1.75mm filament, including the Bambu Lab, Creality, Anycubic and ELEGOO printers in our guides. Only a few older machines use 2.85mm, so check your printer’s specs before you buy.
2. Compare price per kg
Spool sizes range from 250g samplers to 10kg bundles. Dividing the price by the weight is the fastest way to find the real bargain, and the table above does it for you.
3. Match the material to the job
PLA for decor and prototypes, PETG for functional parts, TPU for flexible parts, and silk or matte PLA for finish. Start with PLA and move up as you need the properties.
4. Look at tolerance and spool type
Listings show a diameter tolerance such as ±0.03mm, and tighter is better for consistent extrusion. Check whether the spool is cardboard or plastic if you plan to use a dryer or an AMS-style feeder.
5. Buy colors you’ll actually use
Black, white and grey go fastest. Multicolor bundles are great for variety, but a bundle of ten colors can leave you with eight spools you rarely touch.
6. Plan for moisture
PLA is forgiving, while PETG, TPU and nylon are not. If you buy in bulk, budget for an airtight box with desiccant or a dryer.
How to Dry and Store Filament
Signs your filament is wet:
- Popping or crackling sounds from the nozzle
- Stringing, oozing and a rough or bubbly surface
- Weaker layers that snap more easily than usual
What to do:
- Dry the spool in a filament dryer. As a rough guide, many makers dry PLA at around 45-50°C and PETG at around 60-65°C for several hours, but follow the manufacturer’s advice on your spool.
- Store spools in airtight boxes or vacuum bags with desiccant, and switch to fresh desiccant when the color-changing beads turn.
- Print wet-prone filaments such as PETG and TPU straight from a dryer if you can.
Do You Need a Hardened Steel Nozzle?
Only for abrasive filaments. Carbon-fiber blends such as the ELEGOO PLA-CF and glow-in-the-dark PLA wear down a standard brass nozzle. Plain PLA, PLA+, PETG and TPU are fine on brass. If you plan to print abrasive filaments, buy a hardened steel nozzle that matches your printer, not a general brass kit.
How to Spot a Real Filament Deal
Check Before You Buy:
- Compare the sale price per kg with the table above – A deal only counts if it beats the October price
- Read the title for the total weight – A ‘4-pack’ of 250g spools is 1kg, not 4kg
- Open the Keepa link on each card to see whether a ‘discount’ is really the usual price
- Clip on-page coupons and check the seller – Prices from third-party sellers can change quickly
Black Friday Filament Deals: FAQ
When does Amazon’s Black Friday sale start in 2026?
Amazon hasn’t announced the dates yet. In recent years its Black Friday sale has started about a week before Thanksgiving, which would be around November 19. Black Friday is November 27 and Cyber Monday is November 30.
What is the cheapest filament per kg right now?
On the Amazon listings we checked on October 11-12, 2026, the lowest prices per kg were the Kingroon PETG 10-roll bundle and the SUNLU PETG 4kg pack at $10.00/kg, followed by the ELEGOO Matte PLA 4KG bundle at $11.00/kg and the Creality PLA 2kg pack at $12.00/kg. Prices change often, so check the listing.
Should a beginner buy PLA or PETG?
PLA. It’s the easiest filament to print, works on almost every printer and doesn’t need an enclosure. Move to PETG when you need parts that are tougher or more heat resistant.
What is the difference between PLA and PLA+?
PLA+ is a modified PLA that most brands make tougher and less brittle than standard PLA. The exact formula differs by brand, but it prints at similar settings.
Do I need a filament dryer?
Not for every spool. PLA can last a long time in a sealed box with desiccant. PETG, TPU and nylon absorb moisture faster, and wet filament shows up as popping sounds, stringing and rough surfaces. A dryer or an airtight box with desiccant prevents most of that.
Do I need a hardened steel nozzle?
Only for abrasive filaments such as carbon-fiber blends and glow-in-the-dark PLA, which wear down a standard brass nozzle. Plain PLA, PLA+, PETG and TPU are fine with brass.
How many spools should I buy during Black Friday?
Buy what you’ll use in about three to six months. Filament absorbs moisture over time, so a huge stockpile only makes sense if you have airtight storage.
Does third-party filament work on Bambu Lab printers?
Yes. Bambu Lab printers use standard 1.75mm filament and many third-party brands work well. See our guide to third-party PLA for Bambu Lab printers for tested options.
More Filament and Deal Guides
Last updated: October 12, 2026 | Price verification: All prices were taken from Amazon listings on October 11-12, 2026 and can change.
Affiliate disclosure: This article contains Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you.
Update log: October 12, 2026 – Rebuilt as a 2026 filament buying guide with current prices, price per kg, and new filaments added. The old 2025 prices, ‘lowest price of 2025’ claim, resin pack and Hatchbox listing were removed.
Free 3D printing temperature cheat sheet
Nozzle and bed temperatures for common filaments, in one page.
Keep reading
Filament GuidesBest Cyber Monday Filament and Resin Deals 2026: PLA, PETG, TPU, Resin & Dryers (Live Prices)Nov 30, 2025
Budget PrintersPrime Day 2025: 100 Essential 3D Printer Upgrades and Filament Deals for Every MakerOct 9, 2025
Filament Guides25 Best 3D Printer Filaments on Amazon 2026: Top PLA, PETG & Specialty PicksJan 27, 2026
3D Printed Home DecorComplete 3D Printing Starter Kit Under $400 Total: Everything You Need This Black FridayNov 17, 2025
Filament GuidesThe Complete 3D Printer Filament Guide: Technical Data, Brand Analysis & Scientific Research (2025)Dec 15, 2025
Filament GuidesBest Third-Party PLA Filament for Bambu Lab Printers in 2026 (63 Tested)Mar 11, 2026
1 thought on “Black Friday Filament Deals 2026: PLA & PETG Price Per KG”